Ribbon manufacturers publish ribbon quality identification methods

　　As a small series of guanglianwebbing, I hope that my professional knowledge in the industry can help the vast number of consumers group manager. Let me continue to explain the hard and fast method of identifying webbing quality.

　　Ribbon manufacturers publish ribbon quality identification methods

　　1. Technical testing method:

　　A. Tape thickness test: the tolerance shall not exceed 0.1mm

　　B. Width detection of the ribbon: the tolerance of the ribbon above 1" and 1" shall not exceed 0.25; The belt tolerance of 25MM and above cannot exceed 0.5mm; For belt widths of 1" and below 25MM, standard tolerances shall not exceed 0.25mm; Note: plain webbing, herringbone webbing and flanged webbing must be of sufficient size, but not more than 0.25 min.

　　C. Width detection of the ribbon: the tolerance of the ribbon above 1" and 1" shall not exceed 0.25; The belt tolerance of 25MM and above cannot exceed 0.5mm; For belt widths of 1" and below 25MM, standard tolerances shall not exceed 0.25mm; Note: plain webbing, herringbone webbing and flanged webbing must be of sufficient size, but not more than 0.25 min.

　　Above is small make up for you to provide the program I hope to help you!